Polyurethane Cushion Insoles Ngwa atọ dị ala PU Igwe ụfụfụ
| Aha ngwaahịa: | Igwe ịgba ọgwụ mgbochi ọrịa Pu | Nsonaazụ ịgba ọgwụ: | 26-120g / s |
|---|---|---|---|
| Ngwa ụfụfụ: | Insole nke ọtụtụ agba | Ike ntinye: | Nkebi ahịrịokwu atọ, waya ise, 380V 50HZ |
| Enyere ike | Ihe dịka 11KW | Akụrụngwa: | Foam Polyol+Isocyanate na-agbanwe agbanwe |
| Ìhè dị elu: | Igwe eji ụfụfụ PU Insoles dị ala, 120g/s pu ụfụfụ eme igwe, 120g/s Igwe nrịbama PU dị ala | ||
Polyurethane Soft C kpụrụ ebe nchekwa ụfụfụ ohiri isi na-akpụzi obere nrụgide PU igwe ụfụfụ Nkọwa ngwaahịa nke igwe na-akpụzi injection polyurethane:SPU-RY2-120 ụdị obere nrụgide ụfụfụ igwe bụ ọhụrụ mepụtara Yongjia ụlọ ọrụ dabeere na mmụta na-amịkọrọ elu usoro ná mba ọzọ, nke a na-n'ọtụtụ ebe n'ọrụ na mmepụta nke isiike ụfụfụ dị ka nṅomi osisi ngwá ụlọ, ezinụlọ ngwa (refrigerator, friza, mmiri ọkụ). , Akpụkpọ ụkwụ akpụkpọ ụkwụ, thermal ikpuchi ihe ụlọ, ụgbọala ime na na.Igwe ahụ nwere atụmatụ dị ka ezigbo nkwughachi injection, ọbụlagodi ịgwakọta, arụmọrụ kwụsiri ike, ọrụ dị mfe, nrụpụta nrụpụta dị elu, wdg.Akụkụ nke igwe injection pu:1. N'ihi na Sanwichi ụdị ihe ịwụ, o nwere ezigbo okpomọkụ preservation2.Nkuchi nke PLC touch screen human-computer interface control panel na-eme ka igwe dị mfe iji na ọnọdụ ọrụ bụ nke doro anya.3.Isi ejikọrọ na sistemụ arụmọrụ, dị mfe maka ịrụ ọrụ4.Nkwenye nke isi agwakọta ụdị ọhụrụ na-eme ka ngwakọta ahụ dị ọbụna, na njirimara nke obere mkpọtụ, siri ike na nke na-adịgide adịgide.5.Ogologo swing ọganihu dị ka ihe achọrọ, ntụgharị ọtụtụ akụkụ, dị mfe na ngwa ngwa
6. Igwe mgbapụta dị elu dị elu na-eduga na nha nke ọma
7. Dị mfe maka mmezi, ịrụ ọrụ na nrụzi.
8. Obere ike oriri.
| Mba. | Ihe | Nka nka |
| 1 | Ngwa ụfụfụ | Akpụkpọ ụkwụ (ụkwụ na-apụ apụ) |
| 2 | Viscosity ihe ọdabara (22 ℃) | POLYOL～3000CPS ISO～1000MPas |
| 3 | Mbupute injection | 26-120g / s |
| 4 | Ngwakọta oke nso | 100:28–48 |
| 5 | Ịgwakọta isi | 2800-5000rpm, mmanye ike ịgwakọta |
| 6 | Olu tank | 120L |
| 7 | Igwe mgbapụta mita | A mgbapụta: JR20 Ụdị B mgbapụta: JR20 |
| 8 | Achọrọ ikuku mkpakọ | akọrọ, mmanụ na-enweghị mmanụ P: 0.6-0.8MPa Q: 600NL/min (onye ahịa nwe) |
| 9 | nitrogen chọrọ | P: 0.05MPa Q: 600NL/min (onye ahịa nwe) |
| 10 | Usoro njikwa okpomọkụ | Igwe ọkụ: 2×3.2Kw |
| 11 | ike ntinye | eriri atọ nke eriri ise, 380V 50HZ |
| 12 | gosiri ike | ihe dịka 11KW |
| 13 | ogwe aka na-efe efe | Ogwe aka na-agbanwe agbanwe, 2.3m (nwere ike ịhazi ogologo) |
Ngwa:Polyurethane Sponges Cusp Insoles Ọsụsọ na-amịnye ujo absorption Insoles Skid Resistance Massage Fanye mpempe akwụkwọ na-eku ume Gel Cushion Insoles.
Mgbochi ịgba ọsọ, ịma jijiji na ịda mbà n'obi.
Nye ezigbo nkwụsi ike na mmetụta nkwụsịtụ.
Insoles na-eku ume na-eme ka ahụ ruo gị ala.
Ihe ntinye akpụkpọ ụkwụ akpụkpọ ụkwụ kacha mma maka ije ije, ogologo ogologo oge na ihe ndị ọzọ.
Nzaghachi: 
