Osisi Ngosipụta Igwe Ngosipụta Ọkpụkpọ Igwe Nrụgide Dị Elu PU Foaming Machine
| Aha ngwaahịa: | Igwe eji eme ụfụfụ polyurethane | Voltaji: | 380 V |
|---|---|---|---|
| Akwụkwọ ikike: | 1 afọ | Ụlọ ọrụ ndị ọdabara: | Okpokoro foto nṅomi osisi |
| Ụdị ụfụfụ: | Ụfụfụ siri ike | Mpụta: | 16-66g/s |
| Oke tankị: | 120L | Ike: | Atọ-adọ ise-waya 380V |
| Aha: | Pu Foam Ime igwe | ||
| Ìhè dị elu: | 66g/s PU igwe na-afụ ụfụ, Igwe na-eṅomi osisi PU, 120L polyurethane foaming igwe | ||
Igwe eji akpụ akpụ akpụ enyo dị elu nke osisi polyurethane PU
Njirimara ngwaahịa nke igwe PU nrụgide dị elu:
1.Adopting atọ oyi akwa nchekwa tank, igwe anaghị agba nchara liner, Sanwichi ụdị kpo oku, mpụta ọbọp na mkpuchi oyi akwa, okpomọkụ mgbanwe, nchekwa na ike ịzọpụta;
2.Adding ihe nlele usoro nyocha ihe, nke nwere ike gbanwee n'efu na-enweghị emetụta mmepụta nkịtị, na-azọpụta oge na ihe onwunwe;
3.Low ọsọ elu nkenke metering mgbapụta, oke ziri ezi, njehie na-enweghị usoro n'ime ± 0.5%;
4.Material eruba ọnụego na presure na-edozi site na moto ntụgharị na ụkpụrụ mgbanwe ugboro ugboro, oke ziri ezi, nhazi nhazi dị mfe na ngwa ngwa;
5.High-performance agwakọta ngwaọrụ, n'ụzọ ziri ezi synchronous ihe mmepụta, ọbụna ngwakọta.Ihe owuwu ihe mgbochi ọhụrụ, interface okirikiri mmiri oyi echekwabara iji hụ na enweghị mgbochi ọ bụla n'oge ọdịda;
6.Adopting PLC na ihuenyo mmetụ mmadụ-igwe njikwa iji chịkwaa ntụtụ ahụ, nhichapụ akpaaka na ikuku ikuku, arụmọrụ kwụsiri ike, ọrụ dị elu, na-achọpụta na-akpaghị aka, chọpụta na mkpu ọnọdụ na-adịghị mma, na-egosipụta ihe ndị na-adịghị mma.
| Mba. | Ihe | Nka nka |
| 1 | Ngwa ụfụfụ | Ihe ịchọ mma Crown Moldings |
| 2 | Viscosity raw ihe (22 ℃) | POLY ～2500MPas ISO～1000MPas |
| 3 | Nrụgide injection | 10-20Mpa (mmeghari) |
| 4 | Mpụta (oke ngwakọta 1:1) | 160-800 g / s |
| 5 | Ngwakọta oke nso | 1: 5 ~ 5: 1 (nwere ike imeghari) |
| 6 | Oge ịgba ọgwụ | 0.5 ~ 99.99S (ziri ezi na 0.01S) |
| 7 | Njehie njikwa okpomọkụ ihe onwunwe | ±2℃ |
| 8 | Tinyegharịa izi ezi nke ịgba ọgwụ | ±1% |
| 9 | Ịgwakọta isi | Ụlọ mmanụ anọ, cylinder mmanụ okpukpu abụọ |
| 10 | Sistemụ hydraulic | Mmepụta: 10L/min Sistemu mgbali 10 ~ 20MPa |
| 11 | Olu tank | 250L |
| 12 | Ike ntinye | Atọ-adọ ise-waya 380V |
Nkọwa ngwaahịa:Polyurethane foaming igwe, nwere echekwa, adaba ọrụ na mmezi, wdg, nwere ike ahaziri dị ka ndị ahịa na-arịọ arịrịọ dị iche iche si na igwe.
Igwe ụfụfụ polyurethane a na-eji akụrụngwa abụọ, polyurethane na Isocyanate.Enwere ike iji ụdị igwe ụfụfụ PU a na ụlọ ọrụ dị iche iche, dị ka ihe ndị dị mkpa kwa ụbọchị, ịchọ mma ụgbọ ala, ngwa ahụike, ụlọ ọrụ egwuregwu, akpụkpọ ụkwụ akpụkpọ anụ, nkwakọ ngwaahịa, ụlọ ọrụ ngwá ụlọ, ụlọ ọrụ agha.Atụmatụ nkeIgwe enyo enyo emeputa igwe ọkụ:1. Ejiri ihe eji eme polyurethane: nke a na-eme site na nkedo ebu ma dị iche na osisi osisi.
2. Nwere atụmatụ nke osisi: nwere ike igwu ala, kpọgidere na bee mirror okpokolo agba
3. Dị iche iche agba imecha: dị ka ọlaọcha, ọdụ́, nwa, ukpa, cherry, uyi, aja aja, oge ochie gold ma ọ bụ ndị ọzọ na agba dị.
4. Nwere ọtụtụ ọhụrụ imewe gụnyere omenala ornate etiti na dịkọrọ ndụ ụdị etiti.
5. A na-anabata atụmatụ ahaziri iche, nha na ngwugwu.
6. Ejiri eserese, enyo maka ịchọ mma mgbidi ma ọ bụ mee ka ọ bụrụ foto foto maka foto ezinụlọ.
7. Iji na-adịgide adịgide na enyi na gburugburu ebe obibi: mmiri na-ekpuchi mmiri, ihe na-ekpuchi mmiri na ihe mgbochi.PU polyurethane igwe nrụgide dị elu dịkwa mma maka mmepụta nke akụkụ ihe ịchọ mma na ihe eji eme osisi na-emepụta ihe nwere ike iji ụfụfụ polyurethane mee ihe eji achọ mma dị ka ịkpụzi okpueze.Enwere ike iji ya mee ihe nṅomi na ngwá ụlọ osisi na
cornice.
Nzaghachi: 
Ezi nzaghachi sitere n'aka onye ahịa Australia anyị nke zụtara igwe ụfụfụ PU polyurethane dị ala.
Ezigbo okwu maka PU polyurethane anyị na-agbanwe ụfụfụ akpụkpọ ụkwụ naanị na insole na-emepụta ahịrị.
